First-year tool list for plumbing apprentices

You do not need a full truck on day one. You need the basics, and you need them every day.

Ask first

Every shop is different, and union agreements often spell out exactly which tools the apprentice supplies. Ask your employer for their list before you spend money. What follows is a common starting point, not a rule.

Usually yours to bring

  • Tape measure and a torpedo level
  • Two pairs of tongue-and-groove pliers in different sizes
  • Adjustable wrenches, small and medium
  • A multi-bit screwdriver and a few standalone screwdrivers
  • Tubing cutters, including a close-quarters cutter
  • Hacksaw and spare blades
  • Utility knife, pencil, permanent marker
  • Hammer
  • Flashlight or headlamp
  • A tool bag or pouch you can carry up a ladder

Usually the company's

Power tools, press tools, threading machines, drain machines, torches and gas, ladders and specialty testing gear are normally supplied by the employer. Do not buy these as a first-year unless you are told to.

Safety gear

CSA-approved safety boots are almost always on you. Hard hat, glasses, gloves and hearing protection are often supplied, but rules differ by province and by site. Ask on day one.

Mark your tools. Buy decent pliers and cutters once. Cheap ones cost more by the second year.

Five minutes a day adds up

Callback is a five-minute daily shift of plumbing questions. Miss one and it comes back until you get it right.

Play today's shift